For the past decade, refreshing a laptop fleet was a settled exercise. You picked a model, set a budget, ordered new assets and planned the next cycle three or four years out. In our 15 years of handling business devices, I can't remember that approach being under as much pressure as it is right now.
The reason sits in a part of the laptop most buyers never think about: memory.
What's happening to device prices
AI infrastructure needs enormous amounts of memory, and the major chip makers have shifted production toward the high-margin memory used in AI data centres. IDC describes this as a reallocation of manufacturing capacity away from the conventional DRAM and storage that go into laptops and phones, and warned the shortage could run well into 2027 (IDC, December 2025).
The effect on PCs is now measurable. In February, Gartner forecast that combined DRAM and SSD prices would rise around 130% by the end of 2026, lifting average PC prices by 17% on 2025 levels. Memory is expected to peak at 23% of a PC's bill of materials, up from 16% in 2025, which leaves manufacturers little room to absorb the cost. Gartner also expects the sub-US$500 entry-level PC segment to disappear by 2028 (Gartner, February 2026).
These are global forecasts, not Australian price lists. But the direction is clear for anyone with a refresh on the calendar.
Holding on longer has a cost too
The obvious response is to wait. Gartner expects business buyers to keep their PCs around 15% longer by the end of 2026 for exactly this reason. It also flags the trade-off: older devices bring more security exposure and more management overhead.
Stretching every device by another year isn't a strategy. It's a deferral, and the cost lands on the IT team or MSP keeping an ageing fleet patched, repaired and productive. Some devices can run well past a standard cycle. Others can't, and knowing which is which matters more when replacements cost more.
From "new or old" to "which devices need to be new"
The question I'm hearing more often has changed. It's less "should we buy new?" and more "which devices actually need to be new?"
The organisations handling this well are moving away from a single like-for-like refresh toward a mix of new, refurbished and redeployed devices. In practice, that comes down to four things.
1. Start with a fleet audit. You can't decide what to replace until you know what you have: age, condition, specification, who uses each device and for what. An audit also shows whether devices are sitting idle in storerooms, and whether people have more hardware than their role needs.
2. Match the device to the role, not the cycle. Some roles need new, high-specification hardware. Many don't. Replace a device when its performance or its user's role calls for it, not because the calendar says so. A device that still does the job can be repaired, securely wiped and reconfigured for its next user. Upgrade what you need, when you need it.
3. Buy a mix of new and refurbished. When devices do need replacing, new shouldn't be the only option on the order. A professionally refurbished business laptop costs less than new and does the job for most roles. Put new hardware where it earns its cost, and fill the rest with refurbished. With prices rising, that mix is how the refresh budget goes further.
4. Treat outgoing devices as part of the budget. Retired devices that still hold value can be graded, wiped to a documented standard and resold, with the return coming back to the business through a service like Recover. That money offsets what comes next, rather than devices being written off.
What this looks like at scale
The clearest large example I've seen is the UK Department for Environment, Food and Rural Affairs (Defra). The Defra group has more than 30,000 staff and around 72,000 devices. Under a five-year end user services contract, it plans for 90% of its laptops, phones and tablets to be refurbished or remanufactured, including redeploying existing devices through to the end of their useful life. It is replacing fixed-schedule refresh with refresh based on device performance, and allocating hardware by role. Defra puts the cost saving on refurbished devices at up to 40% (Defra, February 2026).
It is already moving. Defra reported rolling out 6,012 remanufactured devices in the contract's first seven months, including 4,190 laptops (Defra, August 2026).
Defra's contract was signed before memory prices took off, and its motivation was partly environmental. The industry often calls this circular procurement. But what transfers to everyone else is the operating model: performance-based refresh, role-based allocation and redeployment by default. None of it depends on being a government department. Most organisations won't go as far as 90% refurbished, and don't need to. The point is that the refresh no longer has to be 100% new.
What this means for MSPs and IT teams in Australia
A mixed refresh takes more coordination than ordering a pallet of identical laptops. There are more device sources, more configuration variation and more devices coming back in. That operational load is the real barrier, not the idea itself.
For MSPs, the client relationship and the technical decisions stay with you. The physical work of staging and shipping, repairing and recovering devices doesn't have to. For IT teams in larger organisations, the call on which roles get what is yours. Making a mixed fleet run like a single one is work you can hand off.
Where to start
Is your business still planning to buy every device new? Before your next refresh, it's worth knowing what your current fleet is worth, which devices can be repaired or redeployed, where refurbished will do the job, and where new hardware genuinely earns its cost.
Talk to our team and we'll work through it with you.
